|
|
|
|
|
|
- ROTARY HAND TOOLS & HAMMERS
- GROOVING MACHINES
- GROOVING TOOLS
- DIAMOND CUTTING & POLISHING EQUIPMENT
- ULTRASONIC CLEANERS
- DIGITAL IMAGING SYSTEMS
- ENGRAVING MACHINES
- CASTING MACHINES
- CENTRIFUGAL CASTING MACHINES
- CONTINUOUS CASTING MACHINES
- INDUCTION MELTING MACHINES
- LASER WELDING MACHINES
- OVENS
- ACCESSORIES - 1
- ACCESSORIES - 2
- ABRASIVE BLASTING SYSTEMS
- OXYGEN GENERATORS
- MULTICOLOR PRECIOUS METAL BRAZING SYSTEM
ACCESSORIES - 2
|
AIR FILTER
& DRYER
|
A) Air
Filter (D-111) series features optimized internal flow
paths to achieve high flow capacities to capture up to 1/4 micron
of water condensation
B) Air filter dryer (D-112) is mounted in series with D-111 to capture up to 0 micron of water condensation Made in Japan of durable lightweight aluminum with polycarbonate filter bowls & metal bowl guards for trouble-free, long life operation in harsh environments, self-purging Lubricators & Air Regulators are also available |
|
|
|
||
|
|
A) YC-400 platinum crucible, 400 gr capacity (for CS-1 &
Menfredi casting machines) B) YC-600 platinum crucible, 600 gr capacity (for CS-2 casting machines) C) YG-800 gold/silver crucible, 800 gr capacity (for CS-1 & CS-2 casting machines) D) YC-300 platinum crucible, 300 gr capacity (for CS-1 & Menfredi casting machines) E) CC-10 cover for YC-400, YC-800, YC-300 F) YC-150 platinum/titanium crucible, 150 gr capacity (for DS-1 & DS-2) G) Yoshida ceramic platinum crucible, 150 gr capacity H) CC-11 cover for YC-600 I) CC-12 half moon cover for YC-400, YG-800, YC-300 J) CC-13 half moon cover for YC-150 |
|
|
|
||
|
INDUTHERM PARTS
|
A) Flask Gasket fd 100 graphite 169/110 B) Flask Gasket fd 100 silicon 169/111 C) Crucible shield OD=98 mm, DI=80 mm, L=140 mm D) Grain Melting Crucible for 245 cm3 = 2.5 kg silver E) Casting Crucible for 245 cm3 = 2.5 kg silver F) Sealing Rod for graphite sealing balls G) Thermocouple Cover H) Graphite Balls I) Sealing Rod with tapered end J) Crucible bottom insulation K) Crucible top insulation L) Silicon sealing gasket for flangeless flasks M) Thermocouple (1500ēC PtRh-Pt or 1200ēC NiCr-Ni) |
|
|
|
||
|
INVESTMENT POWDER
|
The secret is out! Never been done before! Now you can perform stone in place wax platinum casting & achieve results that were never possible before, smooth surfaces and a finish as if your castings were tumbled and stones that sparkle. All of that can be achieved within 3 hours, from wax to cast, with the introduction of the TUV investment casting. 50 & 100 lbs cases are available including bindery, instructional literature & burn-out cycle Code #: TUV-2000 |
|
|
|
||
|
|
Quick Disconnect Fittings available in 1/8",
1/4", 1/2", 3/4" and in different shapes Other sizes and shapes are available upon request Hoses available in 6 mm, 8 mm & 1/8", 1/4", 1/2", 3/4" and 1". Please specify for gas, liquid or vacuum
|
|
Yahal USA
611 Wilshire Blvd., Suite 1200, Los Angeles, CA 90017 USA
Tel: (213) 627-6925 Fax:(213) 627-6807
Email: yahalusa@aol.com
www.yahalusa.com
Copyright Š 2000 Yahal USA. Last modified: October 18, 2001
Send email to thierry411@hotmail.com
with questions or comments about this web site