|
|
|
CENTRIFUGAL
CASTING MACHINES
| CS-1

|
|
The CS-1 has been
conceived to satisfy the big jewelry companies needs as well as
small work shops. It is capable of melting without any
interruption up to 800g of gold or 400g of platinum each time.
Features:
• Power supply: 7.5kW, solid state microprocessor controlled generator
• Crucible capacity: 800g of pure gold - 400g of platinum
• Max. cylinder dimensions: 120H x 110mm
• Supply: 220V single phase 50/60Hz
• Supplied: ceramic crucible 400g, graphite crucible 800g
• Dimension: 60cm x 60cm x 100cm
• Electronic temperature control (2500û C)
• Vacuum Pump: 25cfm Bush pump
• Water Cooling System: 200 liters/hr
• Weight: 135kg (279 lbs)
• 1 1/2 year warranty on power supply

|
|
| CS-2

|
|
Features:
• Power supply: 7.5kW, solid state microprocessor controlled generator
• Crucible capacity: 2kg of pure gold
• Max. cylinder dimensions: 12cm x 20cm
• Supply: 380V three phase 50/60Hz
• Supplied: 1 graphite crucible with lid
• Dimension: 75cm x 75cm x 100cm
• Inert gas protection circuit and optical infrared pyrometer
• Vacuum Pump: 25cfm Bush pump
• Water Cooling System: 200 liters/hr
• Weight: 180kg (396 lbs)
• 1 1/2 year warranty on power supply |
|
| CS-3

|
|
Features:
• Power supply: 7.5kW, solid state microprocessor controlled generator
• Crucible capacity: 3kg of pure gold
• Max. cylinder dimensions: 14cm x 22cm
• Supply: 380V three phase 50/60Hz
• Supplied: 1 graphite crucible with lid
• Dimension: 90cm x 96cm x 105cm
• Inert gas protection circuit and optical infrared pyrometer
• Vacuum Pump: 25cfm Bush pump
• Water Cooling System: 200 liters/hr
• Weight: 200kg (440 lbs)
• 1 1/2 year warranty on power supply |
|
| DS-1

|
|
The DS-1 has been
conceived to satisfy the small jewelry companies. It is capable
of melting without any interruption up to 150g of gold or 150g
of platinum each time.
Features:
• Power supply: 5kW, solid state microprocessor controlled generator
• Crucible capacity: 150g of pure gold - 150g of platinum
• Max. cylinder dimensions: 60mm x 110mm
• Supply: 220V single phase 50/60Hz
• Supplied: ceramic crucible 150g, graphite crucible 150g
• Dimension: 50cm x 50cm x 100cm
• Electronic temperature control (2500º C)
• Vacuum Pump: 25cfm Bush pump
• Water Cooling System: 200 liters/hr
• Weight: 100kg (220 lbs)
• Double latch safety locks
• 1 1/2 year warranty on power supply
|
|
| DS-2
TITANIUM PLUS

|
|
The DS-2 has been
conceived to satisfy the special needs for jewelry company that
cast exotic alloys. It is capable of melting without any
interruption up to 50g of titanium or 150g of platinum each
time.
Features:
• Power supply: 5kW, solid state microprocessor controlled generator
• Crucible capacity: 50g of titanium - 150g of platinum
• Max. cylinder dimensions: 60mm x 110mm
• Supply: 220V single phase 50/60Hz
• Supplied: ceramic crucible 150g, graphite crucible 150g
• Dimension: 50cm x 50cm x 100cm
• Electronic temperature control (2500û C)
• Vacuum Pump: 25cfm Bush pump
• Water Cooling System: 200 liters/hr
• Weight: 100kg (220 lbs)
• 1 1/2 year warranty on power supply

|
|
|
Yahal USA
611 Wilshire Blvd., Suite 1200, Los Angeles, CA 90017 USA
Tel: (213) 627-6925 Fax:(213) 627-6807
Email: yahalusa@aol.com
www.yahalusa.com
Copyright © 2000 Yahal USA. Last modified: October 18, 2001
Send email to thierry411@hotmail.com
with questions or comments about this web site
|